IHSA has been selected as a provider of services under WSIB’s new Health and Safety Excellence program.
Click here to learn how you can save money and create a safer workplace.

FAQs about MSDs

Answers to the most frequently asked questions about musculoskeletal disorders.

What are musculoskeletal disorders?

Musculoskeletal disorders (MSDs) are injuries of the muscles, nerves, tendons, ligaments, joints, cartilage, or spinal discs. MSDs are not typically the result of any instantaneous or acute event (such as a slip, trip, or fall) but reflect a more gradual or chronic development.

Other expressions used to describe MSDs include

  • Repetitive Strain Injuries (RSIs)
  • Cumulative Trauma Disorders
  • Overuse Injuries
  • Repetitive Motion Disorders.

Medical terms used to describe MSDs to various parts of the body include low back pain, tendinitis, bursitis, carpal tunnel syndrome, epicondylitis, trigger finger, thoracic outlet syndrome, carpet layers' knee, and degenerative disc disease.

Why are MSDs a problem?

  • MSDs may cause a great deal of pain and suffering among afflicted workers.
  • MSDs are among the most common lost-time injuries. Over a seven-year period, MSDs average approximately 32% of the total annual lost-time injuries in Ontario construction (see Figure 1).
  • MSDs are among the most costly occupational problems. As shown in Figure 2, MSDs accounted over 28% of Workplace Safety and Insurance Board (WSIB) costs.
  • Job activities that may cause MSDs span diverse workplaces and operations.
  • MSDs may decrease productivity and the quality of products and services. Workers experiencing aches and pains on the job may not be able to do quality work.

What risk factors contribute to MSDs?

The following are recognized as important risk factors, especially when they occur at high levels and in combination.

Forceful exertion

Force is the amount of effort required to perform a task or job. The amount of force one can exert depends on one's posture and the number of exertions performed. The more force that is exerted, the greater the stress on the body. Lifting, pushing, pulling, and gripping a tool are examples of activities that require exerting force or muscle effort.

Repetitive movements

Movements performed over and over are described as repetitive movements. But a repetitive movement can also be an awkward posture held for long periods of time. These movements can be of risk to the worker because of continual stress placed on one body part without sufficient muscle recovery time. Nailing a deck, screwing drywall, and tying rebar are examples of repetitive tasks.

Awkward postures

Postures are the positions of body parts. Unnatural positions or awkward postures are those in which joints are held or moved away from the body's natural position. The closer the joint is to its end of range of motion (for instance, bending the back forward as far as possible), the greater the stress placed on the soft tissues of that joint, such as muscles, nerves, and tendons.

Secondary risk factors
  • Contact pressure is any external pressure that is applied to soft tissues and puts stress on those tissues. Holding tools where handles press into parts of the hand or arm is an example of contact pressure.
  • Vibration is a secondary risk factor which can cause damage to nerves and blood tissues as well as other soft tissues.
  • Gloves can be a risk factor for musculoskeletal disorders if they do not fit properly or if they restrict movement of the fingers and hands.
  • Temperature can also affect muscles. Cold temperatures increase the stress placed on soft tissues by reducing their range of motion and flexibility. Heat affects the work rest cycles required due to the increase in fatigue and the need for muscle recovery.
Combination effect

Chance of injury increases when two or more MSD risk factors combine in one job. One factor alone is unlikely to cause a high risk of injury. For example, performing a forceful lift once places a worker at less risk than performing a forceful lift several times an hour.

How can MSDs be controlled?

Two approaches are widely accepted for controlling workplace ergonomic hazards.

Engineering Controls

These are measures taken to modify the forcefulness, repetitiveness, awkwardness, vibration levels, physical pressures, or environmental extremes connected with a particular job. Engineering controls are the preferred approach in preventing MSDs. Examples include modifications of 1) the workstation layout, 2) selection and use of tools, 3) work materials, and 4) work methods.

Administrative Controls

Administrative controls are management-directed work practices and policies. Administrative control strategies include 1) changes in job rules and procedures such as scheduling more rest breaks, 2) rotating workers through jobs that are physically tiring, and 3) training workers to recognize ergonomic risk factors and to learn techniques for reducing stress and strain while performing their job. Although engineering controls are preferred, administrative controls can be helpful as temporary measures until engineering controls can be implemented or when engineering controls are not technically feasible. Since administrative controls do not eliminate hazards, the necessary precautions and safeguards must be followed. Interventions to control MSDs can range from the simple to the elaborate. Modifications to existing design can be costly, but in many circumstances the interventions can save time and money.

What are some construction controls?

The following are examples of engineering and administrative controls aimed at reducing MSDs in construction.

Manual handling of tools and material

  • Plan ahead to minimize material handling.
  • Improve housekeeping to prevent trips and falls.
  • Where available, order ready-mixed mortar to decrease repetitive shovelling and exposure to cement powder.
  • Use carts, dollies, hoists, or other mechanical handling devices.
  • Increase use of ladder hoists, gin poles, daisy chains, or cranes to move materials on or off roofs.
  • Use chain falls, motorized buggies, carrying handles, or extension handles for carrying large or awkward materials like drywall.
  • Break loads into smaller units. For instance, put cement in bags weighing less than 50 lb.
  • Use shoulder pads when carrying loads on shoulders.
  • Employ administrative controls such as ergonomics training, pre-job exercises, weight labelling of materials, and encouraging two-person lifts with heavy objects.

Social Networks

Join us on some of the following social networks. Follow our daily tweets on twitter. Browse our video archive on Vimeo and subscribe to our channel on YouTube.

© Copyright Infrastructure Health & Safety Association. All rights reserved.